Crestron DM NVX Series Product Manual Download Page 28

Page: 28 / 90

•

DM-NVX-36x(C) Encoders/Decoders

Product Manual – DOC. 8879C

Using the Web Interface

For a DM NVX device that is set to Transmitter mode, enable or disable adaptive bit rate

functionality:

Click the Settings tab and then click Stream.

In the Advanced section, set the Adaptive Bitrate toggle switch in the On (right)

position to enable the functionality. To disable the adaptive bit rate, set the

toggle switch in the Off (left) position (default setting).

Settings Tab – Stream, Advanced, Adaptive Bit Rate

NOTE:

When adaptive bit rate functionality is enabled, a bit rate cannot be set in the

Bitrate drop-down list.

Using SIMPL Windows

Enable or disable adaptive bit rate functionality in Slot-01: Stream Transmit. Trigger the

<AdaptiveBitrateModeEnable> digital input join to enable adaptive bit rate functionality.

To disable adaptive bit rate functionality, trigger the <AdaptiveBitrateModeDisable>

digital input join. For additional information, refer to the SIMPL Windows help file.

Summary of Contents for DM NVX Series



























































































Search results

Summary of Contents for DM NVX Series

Reviews:

Related manuals for DM NVX Series

Brands by name

Popular brands

Crestron DM NVX Series, Product Manual

Search results

Summary of Contents for DM NVX Series

Reviews:

Related manuals for DM NVX Series

Brands by name

Popular brands