LED Indicators
Refer to the following table for information about the LED indicators on the card.
LED Indicator
Color
Meaning
TX
Green
The device is in transmitter (encoder) mode.
RX
Green
The device is in receiver (decoder) mode.
OL
Green
The device is online with a control system.
LAN 1
Green
An Ethernet link is established.
Flashing amber
Data activity is occurring on the Ethernet link.
LAN 2 LINK
Green
An Ethernet link is established.
LAN 2 ACT
Green
Data activity is occurring on the Ethernet link.
HDMI OUTPUT
Green
An HDMI signal is being transmitted at the HDMI output.
HDMI INPUT 1-2
Green
An HDMI signal is detected at the corresponding
HDMI input.
Upgrade the Firmware
Before using the card, upgrade the firmware. The latest firmware can be downloaded from the
Crestron website (
www.crestron.com
).
Configure the Card
Configure the card using the web interface. To access the web interface, open a web browser and
then go to the IP address of the card.
NOTE:
By default, the IP address of the card is assigned by a DHCP server on the network. If a
DHCP server does not exist on the network, the IP address defaults to a link-local address in the
169.254.
xxx.xxx
range. Refer to RFC 3927 for detailed information about link-local addressing.
To find the IP address of the card, use the menu on the front panel display of the DMF-CI-8.
To log in to the web interface, enter the user name and password of the card. The default user
name and password are both
admin
.
Connect to the Crestron XiO Cloud Service
The Crestron XiO Cloud™ service allows supported Crestron devices across an enterprise to be
managed and configured from one central and secure location in the cloud. Supported devices
are preconfigured to connect to the service. Use of the service requires a registered Crestron XiO
Cloud account.
To connect the card to the Crestron XiO Cloud service:
1.
Record the MAC address and serial number that are labeled on the shipping box or printed
circuit board (PCB). The MAC address and serial number are required in order to add the
card to the Crestron XiO Cloud environment.
2.
Do either of the following:
•
If you have a Crestron XiO Cloud account, go to
to access the
Crestron XiO Cloud service.
•
If you do not have a Crestron XiO Cloud account, go to
www.crestron.com/xiocloud
to
register for an account.
For detailed information about using the Crestron XiO Cloud service, refer to the Crestron XiO
Cloud Service User Guide (Doc. 8214) at
www.crestron.com/manuals
.
Additional Information
Scan or click the QR code for detailed product information.
Compliance and Legal
As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
The product is a class 1 laser product. It complies with safety regulations of IEC 60825-1, FDA 21 CFR 1040.11 and FDA 21 CFR
1040.10.
WARNING:
Visible and invisible laser radiation when open. Avoid direct exposure to beam.
NOTE:
Plug the included dust cap into the optical transceiver when the fiber optic cable is unplugged.
The product warranty can be found at
www.crestron.com/legal/sales-terms-conditions-warranties
.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/legal/open-source-software
.
Crestron, the Crestron logo, Crestron XiO Cloud, and DM NVX are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Dante is either a trademark or registered trademark of Audinate
Pty Ltd. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks
of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names
may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims
any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
©2018 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Quick Start - Doc. 8392A
(2052697)
09.18
Specifications subject to
change without notice.
