Crestron DM-NVX-352 Interface Manual Download Page 72 | Manualshive

Page: 72 / 85

Crestron DM-NVX-352 Interface Manual Download Page 72

66 • DM-NVX-352(C)

Web Interface Guide — Doc.

Authentication Management

Click the Authentication Management tab to configure authentication management for users and
groups and to allow different levels of access to the functions of DM-NVX-352(C).

By default the authentication mode is enabled (set to On).

Move the Enable Authentication slider to the desired position (On or Off) to specify whether
authentication will be enabled or disabled.

NOTES:

l

When authentication is enabled, you must create a local administrator account by
creating a username and password. These credentials will be necessary to log in.

l

When authentication is disabled, all existing users and groups will be deleted from the
system.

After enabling or disabling authentication, the current device session will end and you will be
redirected to the login page. Turning authentication on or off does not affect existing user or
group accounts on DM-NVX-352(C).

«
...
70
71
72
73
74
...
»

Summary of Contents for DM-NVX-352






















































































Reviews:

No comments