Crestron DM-NVX-352, Interface Manual, Page: 25 / 85

Web Interface Guide — Doc. DM-NVX-352(C) • 19
l
RTSP Port: Enter a custom TCP port number for the RTSP server of the primary
audio/video stream (Transmitter mode only).
Valid values range from 1 to 65535. By default the RTSP Port of the DM-NVX-352(C) is set
to port 554.
l
TS Port: Enter a custom UDP port (value must be an even number; an odd value will be
rejected by the device) at which both audio and video are transmitted. By default the TS Port
is set to 4570. Valid values range from 1 to 65530.
Advanced Streaming Options when DM-NVX-352(C) is configured as Transmitter
Adaptive Bitrate: (Only applicable in Transmitter Mode). Select this option to have the device adapt
the bitrate automatically based on the resolution of the stream. If this is selected, you cannot
manually select a bitrate with the Bitrate option below.
-or-
Bitrate: (Only applicable in Transmitter Mode). Select a bitrate from the Bitrate drop-down list to
set the bitrate of the transmitted stream in Mbps. Crestron recommends using the default value.
-or-
Select Custom in the Bitrate drop-down list and type a custom value (in Mbps) in the Custom
Bitrate text field below.
Active Bitrate: Displays the current Bitrate of the stream.
(Only applicable in Transmitter Mode) Select the Custom TTL check box and enter custom TTL
(Time-to-Live) value in the TTL text field. TTL values can range from 1 to 255.
(Only applicable in Transmitter Mode) Select the Custom DSCP check box and enter custom value
in the DSCP text field. DSCP values can range from 1 to 63.