4
•
DM-MD8X1-4K-C and HD-MD8X1-4K: 4K Scaling Auto-Switchers
Supplemental Guide – DOC. 7718B
HDMI IN 1-4: 19-pin Type A HDMI female;
Digital video/audio inputs;
Signal Types: HDMI, DVI, or Dual-Mode DisplayPort
NOTE:
The HDMI inputs require an appropriate adapter or interface cable to
accommodate a DVI or Dual-Mode DisplayPort signal. The CBL-HD-DVI interface cable
is sold separately.
HDMI OUT: 19-pin Type A HDMI female;
Digital video/audio output;
Signal Types: HDMI, DVI
NOTE:
The HDMI output requires an appropriate adapter or interface cable to
accommodate a DVI or Dual-Mode DisplayPort signal. The CBL-HD-DVI interface cable
is sold separately.
DM OUT: (DM-MD8X1-4K-C only) 8-pin RJ-45 female, shielded;
DM 8G+
®
output, HDBaseT
®
standard compliant;
PoDM PSE (Power Sourcing Equipment) port (HDBaseT PoE compatible);
Connects to the DM 8G+ input of a DigitalMedia receiver or other DM
®
device or to an
HDBaseT device via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable;
Green LED indicates DM link status;
Solid amber LED indicates HDCP video;
Blinking amber LED indicates non-HDCP video
NOTE:
The DM-MD8X1-4K-C cannot connect to an Ethernet LAN over a DM
connection. It must be connected using its onboard LAN port.
NOTE:
Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for
intrabuilding use only and should not be connected to a line that runs outside of the
building in which the PSE is located.
MIC IN: (DM-MD8X1-4K-C only) 3-pin 3.5 mm detachable terminal block;
Balanced microphone audio input;
Input Level: -60 to 0 dBV, 1 Vrms maximum;
Input Impedance: 6.5k Ohms balanced;
Phantom Power: 48 Vdc, software enabled/disabled
LAN: 8-pin RJ-45 female;
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
Ground ( ): 6-32 screw, chassis ground lug
100-240 V~1.4 A 50/60 Hz: IEC 60320 C14 mains power inlet;
Mates with removable power cord, included
AUDIO OUT: 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
IR OUT: 3.5 mm mini-phone jack;
IR/serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 volts) up to 115.2k baud
Summary of Contents for DM-MD8X1-4K-C
Page 4: ......
