20 • DM Lite® 4K60 4:4:4 Extenders
Product Manual — Doc. 9259A
HD-TX-4KZ-211-2G
The front and rear of the HD-TX-4KZ-211-2G transmitter provide connectors, controls, and
indicators as discussed in the following sections.
Front View
The following illustration shows the front of the HD-TX-4KZ-211-2G.
HD-TX-4KZ-211-2G, Front
①
HDMI IN Port: HDMI Type A connector, female;
HDMI digital video/audio input;
DVI and Dual-Mode DisplayPort™ interface compatible with appropriate adapter or
interface cable (CBL-HD-DVI interface cables sold separately)
②
HDMI IN LED: Green LED, indicates that the device is receiving an HDMI signal
③
PWR LED: Lights to indicate that power is being applied to the device. Amber indicates
that the device is booting. Green indicates that the device is operational.
④
INPUT Push Button: Enables manual selection of HDMI or USB-C DisplayPort input
⑤
AUTO LED and Push Button: Green LED, lights to indicate that automatic switching of
inputs is enabled;
Push button, enables or disables automatic switching of inputs
⑥
SETUP LED and Push Button: Red LED, lights to indicate that the SETUP push button
is pressed;
Push button, enables Ethernet setup, applicable only when the device is used with a
DMPS Lite switcher
