Crestron DIN-GWDL, Product Manual

Page: 26 / 40

26 • DIN-GWDL and DIN-GWDL-SPLTR Product Manual — Doc. 9096A
Local Control
Test and control connected light fixtures without a control processor to verify the system. Use
the MODE rotary dial and SELECT to change the local test modes of the DIN-GWDL.
Mode Dial with Select and Reset Buttons
NOTE: PG3 and PG4 are reserved for future use. N/A has no function.
Set All Fixtures to Neutral White
To provide light control prior to control system installation, use PG1 to turn all lights on (at
neutral white) and off. PG1 stops the program, ignores any network commands, and sets all
fixtures to neutral white at 100% intensity.
NOTE: This requires all DMX-C fixtures to be new from the factory or to have been previously
addressed by Crestron Home.
l
Tap SELECT to turn all fixtures on and off.
l
Hold SELECT to dim all fixtures up and down.