Crestron
DIN-1DIMU4
DIN Rail Universal Dimmer
DIN Rail Universal Dimmer:
DIN-1DIMU4
Introduction
The DIN-1DIMU4 is a four channel universal lighting control module
designed to support dimming of both forward and reverse phase type
loads. A single model supports both 120 and 220-240 Volt electronic and
magnetic low-voltage, incandescent, neon/cold cathode, 2-wire dimmable
fluorescent, and non-dimmable lighting loads up to 5 Amps per channel,
10 Amps total.
Features and Functions
•
Four channels of forward or reverse phase dimming
•
Auto load detection
•
120 to 240 Volt 50/60 Hz operation
•
Selectable non-dim mode
•
Extreme stability in noisy environments
•
Short circuit and overload protection
•
Master air-gap relay
•
Override input
•
Cresnet
®
communications
•
Setup via front panel or software
•
Programmable functionality via DIN-AP2
•
12M wide DIN rail mounting
Operations & Installation Guide – DOC. 6668D
DIN Rail Universal Dimmer: DIN-1DIMU4
•
1