Crestron
DM-TX-100/-F
DigitalMedia™ CAT & Fiber Transmitters 100
DM-TX-100-F in a Basic Application
No
LAN
connection is required for these devices to transmit HDMI and USB in a
point-to-point configuration. If you wish to use the control ports (IR, RS-232, Relay,
Sense) from a control system, you can connect either
LAN
port (on the
DM-TX-100/-F) to the control system’s network. Both devices will be connected
because Ethernet is embedded inside DM. You may also use the other
LAN
connection to provide Ethernet connectivity to a remote device.
For DM CAT (e.g. DM-TX-100) you only have to apply power to one and the other
will receive it through the DMNet cable. For DM fiber (e.g. DM-TX-100-F), each
end has a local power supply. With the DM-TX-100-F, all you need is the fiber
connection.
Operations Guide – DOC. 6810C
DigitalMedia™ CAT & Fiber Transmitters 100: DM-TX-100/-F
•
5
