64 x 64 DigitalMedia Switcher
Crestron
DM-MD64X64
20
DigitalMedia Switcher: DM-MD64X64
Operations & Installation Guide – DOC. 7318A
Stacking
Four “feet” are provided with the DM-MD64X64 so that if the unit is not rack
mounted, the rubber feet can provide stability when the unit is placed on a flat
surface or stacked. These feet should be attached near the corner edges on the
underside of the unit prior to the hookup procedure. Refer to the following
illustration for placement of the feet.
Foot Placement for the DM-MD64X64
NOTE:
No more than two DM-MD64X64 units should be stacked.
Hardware Hookup
Make the necessary connections as called out in the following illustrations. Refer to
“Network Wiring” on page 17. Apply power after all connections have been made.
NOTE:
Ensure that the unit is properly grounded by connecting the chassis ground
lug to an earth ground (building steel).
NOTE:
To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.