
This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics, Inc., with all rights
reserved. One of those independent works, Linux Bridge Project, is copyrighted under the GNU GENERAL PUBLIC LICENSE, Version2,
reproduced in “8BGNU General Public License” on page 53, where the corresponding source code is available at: ftp://ftp.crestron.com/gpl.
The specific patents that cover Crestron products are listed at
patents.crestron.com
WARNING:
There are no user-serviceable parts inside this equipment. Servicing must be performed by qualified
personnel only.
WARNING:
Before servicing this unit, disconnect all power cords.
Regulatory Compliance
As of the date of manufacture, the DM-MD64X64 has been tested and found to comply with specifications
for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
The DMB-I-S, DMB-I-S2, DMB-O-S, and DMB-O-S2 are class 1 laser products. They comply with safety
regulations of IEC 60825-1, FDA 21 CFR 1040 11 and FDA 21 CFR 1040 10.
WARNING:
Visible and invisible laser radiation when open. Avoid direct exposure to beam.
NOTE:
Plug the included dust cap into the optical transceiver when the fiber optic cable is unplugged.
.
Crestron, the Crestron logo, AIR, Auto-Locking, CresFiber, Crestron Studio, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM
8G+, e-Control, Fusion RV, and QuickSwitch HD are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States
and/or other countries. Blu-ray Disc is either a trademark or registered trademark of the Blu-ray Disc Association (BDA) in the United States and/or
other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other
countries. DTS, DTS-HD Master Audio, and the DTS logo are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other
countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States
and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or
other countries. SD is either a trademark or registered trademark of SD-3C, LLC in the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.