Touchpanels
Crestron
CT-1000 & LC-1000
26
•
Series 1000 Wall-Mounted Touchpanels
Operations Guide – DOC. 5813B
Setup | Communications Settings Command
4. Select
RS-232
as the connection type. Verify that an available COM
port (COM 1 is shown after this step) is selected, and that all
communication parameters and necessary options from the “Port
Settings” window are selected as shown after this step. Click the
OK
button to save the settings and close the window.
“Port Settings” Window
NOTE:
The parameters shown in the illustration above are the port settings for a
PRO2 control system. Consult the Operations Guide for the control system being
used for exact parameter selection.
