Crestron
CSP-RS232I
RS-232
Isolator
Setup
Installation
The CSP-RS232I can be mounted in a rack or to any surface using the
integral mounting flanges. Mounting hardware is not provided.
NOTE:
For optimum performance, mount the CSP-RS232I as close to
the control system as possible.
Hardware Hookup
Make the necessary connections as called out in the illustration that
follows this paragraph. Apply power after all connections have been
made.
When making connections to the CSP-RS232I, note the following:
•
Use Crestron power supplies for Crestron equipment.
•
Power can be supplied to either the 12 VDC port or the 24 VDC
port.
•
Use the included RS-232 cable to connect the CSP-RS232I to the
control system.
Hardware Connections for the CSP-RS232I
GROUND:
CONNECT TO GROUND
TERMINAL ON CONTROL
SYSTEM
DEVICE:
TO RS-232
PERIPHERAL
CONTROL SYSTEM:
TO RS-232 PORT OF CRESTRON
CONTROL SYSTEM
24 VDC POWER INPUT:
FROM CRESNET BUS
12 VDC POWER INPUT:
FROM OPTIONAL
POWER SUPPLY
Operations & Installation Guide – DOC. 6634A
RS-232 Isolator: CSP-RS232I
•
9
