Crestron
CP3 & CP3N
3-Series Control Systems
Operations Guide – DOC. 7316C
3-Series Control Systems: CP3 & CP3N
•
11
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
*
,
CONTROLS &
INDICATORS
DESCRIPTION
14
CONTROL SUBNET
(CP3N Only)
Amber/
Green
LED
Amber
LED
Pin 8
Pin 1
(1) 8-pin RJ-45 with two LED indicators;
10/100/1000BASE-T Ethernet port;
Left LED indicates link status;
Amber:
Link – 1 Gbps
Green:
Link – 100 Mbps
Off:
No link or Link – 10 Mbps
Right LED indicates Ethernet activity
Flashing:
Activity – Flash rate depends
on amount of activity
Off:
No Activity
Provides a dedicated local network for
Crestron Ethernet devices
PIN
SIGNAL
PIN
SIGNAL
1
BI_DA +
5
BI_DC -
2
BI_DA- -
6
BI_DB -
3
BI_DB +
7
BI_DD +
4
BI_DC +
8
BI_DD -
15
NET
G
Y Z
24
(1) 4-pin 3.5 mm detachable terminal block,
Cresnet master port;
Outputs power to Cresnet devices if a power
pack is connected to the 24 Vdc power input
jack;
Receives Cresnet network power if no power
pack is connected to the 24 Vdc power input
jack
24
: Power (24 volts dc)
Y
: Data
Z
: Data
G
: Ground
16
24VDC 2.0A
(1) 2.1 mm barrel dc power jack,
24 volt dc power input
Power supply included;
Passes through to
NET
port to power
Cresnet devices
17
G
(1) 6–32 screw, chassis ground lug
* Interface connectors for
RELAY OUTPUT
,
I/O
,
IR-SERIAL OUTPUT
,
COM1
,
COM 2, COM 3
,
and
NET
ports are provided with the unit.
