Crestron CNXCPU Operations & Installation Manual Download Page 8

CNX Control Processor Card                                                  Crestron 

CNXCPU

4  

••

  CNX Control Processor Card: CNXCPU

Operations & Installation Guide - DOC. 8135

Leading Specifications

The table below provides a summary of leading specifications for the CNXCPU.
Dimensions are approximations rounded to the nearest hundredth unit.

Leading Specifications of the CNXCPU

S P E C I F I C A T I O N

D E T A I L S

Power Requirements

2 4 V D C   f r o m   t h e   C N P W S - 7 5   E x t e r n a l  
Power Supply (not provided), load factor 
of 4 Watts. (With optional Ethernet 
Expansion Card installed, load factor is 8 
Watts.) *

Connector

26-pin DPA connector for optional 
Ethernet Expansion Card.

Dimensions & Weight

Height:    5.00 in (12.70 cm)
W idth:     1.56 in (3.96 cm)                 
Depth:     6.65 in (16.89 cm)    
Weight:  5.30 oz (0.15 kg)

*

CAUTION:

  The total load factor of the CNXCPU depends upon the

components of the control system. Add the power requirements of the CNXCPU

plus

 the control system requirements 

plus

 the combined requirements of the

remaining expansion cards. Do not exceed 75 watts for total load factor.

As of the date of manufacture, this unit has been tested and found to comply with
specifications for CE marking.

NOTE:  

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Setup

Installation or Replacement

When shipped, the Modular Control System has the CNXCPU installed. The
procedure on the next page can be used to install (or re-install) or replace the
CNXCPU. Items required to install or replace the CNXCPU are already attached to
the unit. The only tool required is a grounding strap.

CAUTION:  

The CNXCPU contains electrostatic sensitive devices (ESD); observe

precautions for handling ESDs to avoid damaging the card.

CAUTION:  

The Modular Control System contains CNX expansion card slots and a

double-sized CPU slot for the CNXCPU. Do not attempt to install the CNXCPU into
any slot other than the slot labeled CPU.

Summary of Contents for CNXCPU













Reviews: