Crestron
CNRACKX
CNX Card Cage System
Operations Guide - DOC. 8133
CNX Card Cage System: CNRACKX
••
23
Crestron Viewport - Incoming Window
NOTE:
The exact text received depends on the given CNRACKX hardware.
5f. Remove power from the unit again and reapply power
without
holding
the
RESET
button down. Wait a few seconds and perform step 7 in
“Obtaining Communications” on page 18.
NOTE:
If after trying all these procedures, communication can not be established,
contact Crestron technical support for assistance. Refer to “Further Inquiries” on
page 28.
Loading the System Program
To load the system program into the CNRACKX, use the Crestron Viewport or the
Transfer Program option in SIMPL Windows. For consistency, the steps that follow
this paragraph use the viewport. To upload a .BIN file into the CNRACKX,
complete the following steps in the order provided:
1.
Select
Tools | Viewport
to open the “Crestron Viewport” dialog box, if
it is not already opened.
2.
Select
File Transfer |
Send Program
(alternatively, depress
Alt+P
) to
open the “Cresnet Simpl Program” dialog box as shown below.
“Cresnet Simpl Program” Dialog Box
