Terminal Block & Module
Crestron
CLTI- & CLXI-2DIM8
Testing
Further Inquiries
If the program is not running yet, loads can be tested by
using Local Mode. Use Local Mode to verify that each
load is connected to the proper output on the modules.
If you cannot locate specific information or have
questions after reviewing this guide, please take
advantage of Crestron's award winning customer service
team by calling the Crestron corporate headquarters at
1-888-CRESTRON [1-888-273-7876]. For assistance in
your local time zone, refer to the Crestron website
(
) for a listing of Crestron
worldwide offices.
1. Press
the
SETUP
button momentarily (less than
three seconds) to enter Local Mode.
The
SETUP
LED and output LED
1
illuminate
and power is applied to the loads connected to
the
DIM1
output.
2. Press
the
SETUP
button again to turn off output
1
and turn on output
2
.
You can also log onto the online help section of the
Crestron website (
) to ask
questions about Crestron products. First-time users will
need to establish a user account to fully benefit from all
available features.
3. Press
the
SETUP
button again for each output.
4. After turning on the last output, press the
SETUP
button again to turn on all outputs.
5. Press
the
SETUP
button once more to turn off
all outputs and LEDs and exit Local Mode.
Industry Compliance
As of the date of manufacture this device has been tested
and found to comply with specifications for CE marking.
Reference Documents
The latest version of all documents mentioned within the
guide can be obtained from the Crestron website
(
http://www.crestron.com/manuals
). This link will
provide a list of product manuals arranged in alphabetical
order by model number.
List of Related Reference Documents
DOCUMENT TITLE
CAEN Automation Enclosures
CAENIB Automation Enclosures
CAENIB-BP Blank Plate for CAENIB
CLTIBN Circuit Breaker Terminal Block
4
•
Terminal Block & Module: CLTI- & CLXI-2DIM8
Installation Guide – DOC. 6411A
