CH-DIM4-D9
Product Manual
Crestron International
• 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • [email protected] •
www.crestron-int.be
9
Programming manager
The CNLDAB-4A symbol has 8 analog inputs (Figure 7). The top four signals correspond
with the four analog outputs. The other four analog inputs correspond with the cut-off
settings. If the Cut off relays are not programmed the relay’s will automatically open when
the matching analog output is <1V.
Figure 7: CNLDAB-4A
Example Program
Control four Analog Outputs and Cut-off Relays
This example illustrates how sliders on a touch panel control the four analog outputs of the
CH-DIM4-D9. The Analog Initialize symbol sets the value on which the four relays should
do the cut-off, in this case on 4 different values.
Figure 8: Slider control of Channel 1
Figure 8: CH-DIM4-D9 program example.