background image

 

The specific patents that cover Crestron products are listed at 

patents.crestron.com

 

 
 
 

Regulatory Compliance 

This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. 

 

As of the date of manufacture, the CEN-SW-POE-5 has been tested and found to comply with specifications 
for CE marking and standards per EMC and Radiocommunications Compliance Labelling. 

 

Federal Communications Commission (FCC) Compliance Statement 

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: 
(1) This device may not cause harmful interference and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

CAUTION:

  Changes or modifications not expressly approved by the manufacturer responsible for 

compliance could void the user’s authority to operate the equipment. 

NOTE:

  This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna 

 

Increase the separation between the equipment and receiver 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 

 

Consult the dealer or an experienced radio/TV technician for help 

 

Industry Canada (IC) Compliance Statement 

CAN ICES-3(B)/NMB-3(B) 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United 
States and/or other countries. UL and the UL logo are either trademarks or registered trademarks of Underwriters 
Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks and trade names 
may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron 
disclaims any proprietary interest in the marks and names of others. 

Crestron is not responsible for errors in typography 

or photography. 
 

This document was written by the Technical Publications department at Crestron. 
©2013 Crestron Electronics, Inc. 
 

Summary of Contents for CEN-SW-POE-5

























Reviews: