Cameo Keypads with infiNET EX
Crestron
INET-CBDEX Series
16
•
Cameo Keypads with infiNET EX
Operations & Installation Guide - DOC. 6992D
Setup
Identity Code
Every INET-CBDEX communicating via RF with a Crestron control
system through a wireless gateway requires a unique RF ID. The RF ID
is a 2-digit hexadecimal number that can range from 03 to 6C. The RF ID
of the unit, set using Crestron Toolbox™, must match the RF ID
specified in the SIMPL Windows program.
Assembly and Installation
Assembly of the keypad consists of placing the button caps in position on
the rear housing assembly, based on how the unit is programmed, and
attaching the bezel.
Installation consists of connecting to power and installing in an electrical
box. A Phillips screwdriver is required for installation.
INET-CBDEX keypads are supplied partially assembled along with
several items as listed in the following table.
Supplied Parts
DESCRIPTION
USE
QTY
Bezel
Holds button caps in position
on rear housing and switch
assembly
1
Screws, Zinc, Phillips,
Pan Head, 2-28 x 3/16”
Used to attach the bezel
assembly to the rear housing
and switch assembly
2
Single-row button cap
Switch cover for a single-row
switch
5
Double-row button cap
Switch cover for two switches
that function as one
3
Triple-row button cap
Switch cover for three
switches that function as one
2
Split-row button caps
(Pair)
Switch cover for a single row
of two switches
2
Screws, Steel, Phillips,
Combo Head, 6-32 x 3/4”
Used to attach the assembled
keypad to an electrical box
2
Summary of Contents for Cameo INET-CBDEX Series
Page 6: ......
