background image

FM Radio Tuner 

 

Crestron 

C2N-TFM

 

26  

  FM Radio Tuner: C2N-TFM 

Operations Guide - DOC. 6233A 

 C2N-TFM FM Tuner RDS Information Input and Output Signal Descriptions 
(continued)  

SIGNAL TYPE AND 
NAME DESCRIPTION 

Analog input: 
<

TuneByTraffic

Selects a traffic report station to search.  
Valid analog values are as follows:  
1 = TA (Traffic Announcement) - searches for 
stations that broadcast special traffic 
announcements.  
2 = TP (Traffic Program) - searches for stations 
that regularly broadcast traffic information during 
the day.  
3 = TA/TP (combination) - searches for stations 
currently broadcasting traffic announcements.  
Setting this analog to a valid traffic report value 
initiates the search. The search operation stops 
when:  
1) a station is found with the given TA/TP flag; or  
2) the Tuner, Scan, PTY Search, or Band mode 
buttons are pressed; or  
3) the maximum loop counter has been reached.  
Sending a new analog value will cancel the current 
search and initiate a new search. 

Analog input: 
<

TuneByPrgTypeNumber

Selects a PTN code (program type number) to 
search. There are 31 different program categories 
available for selection. The categories differ 
depending on whether the tuner is in US or 
European mode.  
Valid values range from 1 to 31. Refer to the table 
at the end of this topic for a table of codes and 
their corresponding categories.  
Setting this analog value to a valid PTN initiates 
the search. The search operation stops when:  
1) a station is found with the given category; or  
2) the Tune, Scan, TA/TP Search, or Band mode 
buttons are pressed; or  
3) the maximum loop counter has been reached.  
Sending a new analog value will cancel the current 
search and initiate a new search. 

Analog output: 
<

PrgTypeCode

Reports the PTN code of the current station. The 
analog values will range from 1 to 31.  
The program type name and additional information 
are reported as serial strings via 
<

ProgramTypeName

>. 

Analog out

put: 

<

UTC_Year

>

 

Some stations that support RDS/RBDS transmit 
UTC (universal time clock) information.  
This analog reports the UTC year. For example, 
the year 2004 will report as 2004d. 

(continued on next page) 

Summary of Contents for C2N-TFM

















































Reviews: