Crestron
C2N-FT-TPS4/TPS4-U
FlipTop Touchpanel Control Center
Press the
Restore Default Audio Settings
button to cancel any changes and restore
all default audio settings: WAV volume = 100%, and WAV function enabled; key
click volume = 100%, and key click function enabled.
Press
Return
to save the settings and return to the SETUP MENU.
Screen Settings
SCREEN SETTINGS
From the SETUP MENU, press the
Screen Settings
button to open the SCREEN
SETTINGS screen, shown at left.
Press the
Brightness
button to open the SCREEN SETTINGS – BRIGHTNESS
screen. Use the UP/DOWN buttons to set the display brightness (0 – 100%). The
area to the right of the buttons shows the relative brightness from 0% to 100%, both
as a numeric value and, for quick visual reference, as an analog bar.
Press the
Key Backlight
button to open the SCREEN SETTINGS – KEY
BACKLIGHT screen. Use the UP/DOWN buttons to set the key backlight brightness
(0 – 100%). The area to the right of the buttons shows the relative brightness from
0% to 100%, both as a numeric value and, for quick visual reference, as an analog
bar.
Press the
LCD Bias
button to open the SCREEN SETTINGS – LCD BIAS screen.
Use the
UP/DOWN
buttons to set the LCD bias (0 – 255). Use the graphic on the
right side of the screen to see the effects of the adjustment. The bias setting is best
when the lines are crisp and dark and the white area around them is bright.
Press
Return
to save the settings and return to the SETUP MENU.
Timeout Settings
TIMEOUT SETTINGS
From the SETUP MENU, press the
Timeout
button to open the SCREEN
SETTINGS – TIMEOUT screen. Use the
UP/DOWN
buttons to set the timeout
from 0 through 120 minutes, where 0 disables the timeout. Adjustment is in one-
minute increments from 1 to 10; in ten-minute increments from 20-120.
STANDBY timeout turns the display and backlight off when the touchpanel is
inactive for the specified time. When the touchpanel is reactivated, the last screen to
be displayed reappears. The specified time is displayed in minutes. The default
STANDBY timeout is 10 minutes.
Press
Return
to save the settings and return to the SETUP MENU.
Diagnostics Menu
DIAGNOSTICS MENU
The
Diagnostics
button from the MAIN MENU should only be used under
supervision from a Crestron customer service representative during telephone
support. Many options available from the DIAGNOSTICS MENU, shown to the left,
are numeric in nature and their interpretation is beyond the scope of this manual.
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
Operations & Installation Guide – DOC. 6398
FlipTop Touchpanel Control center: C2N-FT-TPS4/TPS4-U
•
17