Digital Joystick Camera Controller
Crestron
C2N-CAMIDJ
6
•
Digital Joystick Camera Controller: C2N-CAMIDJ
Operations Guide - DOC. 6341
Network Connection
All connections to the CAMIDJ are made through the 4-pin terminal block NET port
on the rear panel (mating connector supplied).
Controls and Indicators
Controls and related indicators are located on the side, top, and rear panels. Refer to
the figures and descriptions, which follow.
Top Panel Controls and Indicators
IRIS
PWR
NET
LOW
HIGH
SPEED
AUTO
MANUAL
FOCUS
ZOOM
PAN
TILT
C2 N- CA M I DJ
Encoder
Wheel
2-Digit,
7-Segment
Display
Programmable
Pushbuttons
Joystick
2-Digit Display
When using the CamiDJ Interface Module, the display indicates the high and low
speed settings or function as determined by the function select switches. For pan, tilt,
and zoom functions, the display indicates a speed scaling percentage from 0-99. For
the focus function, the display reads “FC.” For the manual iris function, the display
reads “AP.”
PWR
This green power LED illuminates when +24 VDC is supplied to the CAMIDJ.
NET
This yellow network LED illuminates when communication between the control
system and the CAMIDJ is established. Illumination indicates that the SIMPL
program currently loaded has a network device defined at the same Net ID as the
CAMIDJ.
SPEED HIGH/LOW
These red speed LEDs indicate the speed mode selected by the joystick thumb
switches, as determined by the CamiDJ Interface Module or a comparable SIMPL
program. The LEDs are off by default when unit power is turned on.