2-Series IR/Serial Output Expansion Card
Crestron
C2IR-8
Leading Specifications
The table below provides a summary of leading specifications for the C2IR-8.
Leading Specifications of the C2IR-8
SPECIFICATION
DETAILS
Power Requirements
24 VDC, 0.125 A, 3 Watts
IR Output
Up to 1.2 MHz
RS-232 Data Rate
Up to 115K baud
Output Signal Levels
0 to 5VDC
(compatible with most RS-232 input devices)
Crestron Application Builder™
Version 1.1 or later
1
SIMPL™ Windows
®
Version 2.00 or later
2
2-Series Control System Update
File
3
Version 1.000.CUZ or later
4
Dimensions
Height: 0.980 in (2.490 cm)
Width: 5.000 in (12.700 cm)
Depth: 6.77 in (17.19 cm)
1
The card is supported in the Crestron Application Builder Software, both in the Residential and
Commercial versions. Contact Crestron Customer Service for licensing details.
2
The latest software versions can be obtained from the What's New page (SIMPL Windows section)
or Downloads page (SIMPLWIN Library) of the Crestron website (
. New users
are required to register in order to obtain access to the FTP site.
3
Crestron 2-Series control systems include the AV2, AV2 with Card Cage, CP2, CP2E, PAC2,
PAC2M, PRO2, and RACK2.
4
Filenames for 2-Series control system update files have a CUZ extension and can be obtained from
the What's New page (Control Systems Update Files section) or Downloads page (OPSYS Library)
of the Crestron website.
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
NOTE:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference received, including interference
that may cause undesired operation.
2
•
2-Series IR/Serial Output Expansion Card: C2IR-8
Operations & Installation Guide – DOC. 8172
