Crestron
BB-6000
Back Box
Installation Guide - DOC. 5826
Back Box: BB-6000
••
5
Securing Bracket/Plate Assembly to Top and Bottom Edges of Opening
(MOUNTS BRACKET
AND PLATE IN TWO
CENTER TAPPED HOLES)
TWO PAN
HEAD
SCREWS
DRYWALL
METAL
MOUNTING
BRACKET
METAL
MOUNTING
PLATE
10.
Repeat steps 7 through 9 for the bottom horizontal edge of the opening.
11.
Remove necessary knockout(s) from metal electrical box.
12.
Pull Cresnet wire through open knockout(s) in metal electrical box.
13.
Slide the electrical back box through the opening until the rim of the
back box is flush with the mounting surface.
NOTE:
Do not slide the back box too far into the opening or it may fall in between
the gypsum board (e.g., if installation is into an exterior wall).
Positioning Back Box into Opening
DRYWALL
METAL
ELECTRICAL
BOX
