Crestron BB-1700CW Installation Manual Download Page 15

Crestron 

BB-1700CW

 

Wall Mount Back Box for STX-1700CW

 

 

Return and Warranty Policies 

Merchandise Returns / Repair Service 

1.  No merchandise may be returned for credit, exchange, or service without prior 

authorization from CRESTRON. To obtain warranty service for CRESTRON products, 
contact the factory and request an RMA (Return Merchandise Authorization) number. 
Enclose a note specifying the nature of the problem, name and phone number of contact 
person, RMA number, and return address. 

2.  Products may be returned for credit, exchange, or service with a CRESTRON Return 

Merchandise Authorization (RMA) number. Authorized returns must be shipped freight 
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized subsidiaries, 
with RMA number clearly marked on the outside of all cartons. Shipments arriving 
freight collect or without an RMA number shall be subject to refusal. CRESTRON 
reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus 
shipping costs, on any products returned with an RMA. 

3.  Return freight charges following repair of items under warranty shall be paid by 

CRESTRON, shipping by standard ground carrier. In the event repairs are found to be 
non-warranty, return freight costs shall be paid by the purchaser. 

CRESTRON Limited Warranty 

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing 
defects in materials and workmanship under normal use for a period of three (3) years from 
the date of purchase from CRESTRON, with the following exceptions: disk drives and any 
other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for 
a period of one (1) year; touchscreen display and overlay components are covered for 90 
days; batteries and incandescent lamps are not covered.  
This warranty extends to products purchased directly from CRESTRON or an authorized 
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent 
of the dealer's warranty, if any. 
CRESTRON shall not be liable to honor the terms of this warranty if the product has been 
used in any application other than that for which it was intended, or if it has been subjected 
to misuse, accidental damage, modification, or improper installation procedures. 
Furthermore, this warranty does not cover any product that has had the serial number altered, 
defaced, or removed.  
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event 
shall CRESTRON be liable for incidental or consequential damages of any kind (property or 
economic damages inclusive) arising from the sale or use of this equipment. CRESTRON is 
not liable for any claim made by a third party or made by the purchaser for a third party.  
CRESTRON shall, at its option, repair or replace any product found defective, without 
charge for parts or labor. Repaired or replaced equipment and parts supplied under this 
warranty shall be covered only by the unexpired portion of the warranty. 
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, 
expressed or implied, nor authorizes any other party to offer any warranty, including any 
implied warranties of merchantability or fitness for a particular purpose. Any implied 
warranties that may be imposed by law are limited to the terms of this limited warranty. This 
warranty statement supercedes all previous warranties. 

Trademark Information

 

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a 
registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of 
Microsoft Corporation.

 

Installation Guide – DOC. 6105 

Wall Mount Back Box for STX-1700CW: BB-1700CW  

  11 

Summary of Contents for BB-1700CW

















Reviews: