Aspire
®
In-Wall Subwoofer
quickstart guide
ASPIRE_IWS82
www.crestron.com
888.273.7876
201.767.3400
Specifications subject to
change without notice.
ASPIRE_IWS82
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, and Aspire are trademarks or registered trademarks of Crestron Electronics,
Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names
may be used in this document to refer to either the entities claiming the marks and names or their products.
Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for
errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2014 Crestron Electronics, Inc.
3
Specifications
QUICKSTART DOC. 7635A (2039768) 08.14
2
ASPIRE_IWS82 Specifications
S
A
2
Side View With
Measurement Points
Features and Performance
Woofer
Low-Pass
Filter
Crossover
Frequency
Impedence
Frequency
Response
Frequency
Range
Power
Handling
Sensitivity
Environmental
Temperature
Humidity
Dimensions
Height
Width
Depth
Minimum Mounting Depth
Recommended Cutout Size
Construction
Baffle
Grille
Mounting
ASPIRE_IWS82
ABS plastic, black
Steel with white textured finish,
paintable, magnetically-held zero
bezel frameless design
Flush wall mount using eight integral
spring-loaded toggle clamps,
1.35 in (34 mm) maximum surface
thickness
41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing);
For indoor use only
Connections
Input
Maximum
Wire
Size
(2) spring terminals
10 AWG
* Woven poly-glass composite with rubber surround, 8-layer voice coils, and
steel basket
(2) 8.00 in (203 mm)*
120 Hz second order
150 Hz
8 ohm nominal
40 Hz to 120 Hz (±3 dB)
32 Hz to 120 Hz (-10 dB)
200 watts program
89 dB @ 1 W/ 1 m
Weight
Available Model
ASPIRE
_
IWS82-W-T
19.87 in (505 mm)
10.45 in (266 mm)
4.30 in (110 mm)
4.13 in (105 mm)
19.20 in (488 mm) high,
9.80 in (249 mm) wide
10.5 lb (4.8 kg)
Aspire 8 Inch 2-Way In-Wall
Speakers, Each, White Textured
SPECIFICATION
The following table provides corrective action for possible trouble situations.
If further assistance is required, please contact a Crestron customer service
representative.
Further Inquiries
Future Updates
Problem Solving
Troubleshooting
To locate specific information or resolve questions after reviewing this guide,
contact Crestron's True Blue Support at 1-888-CRESTRON
[1-888-273-7876] or, for assistance within a particular geographic region,
refer to the listing of Crestron worldwide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron’s Online Help
at www.crestron.com/onlinehelp. First-time users must establish a user
account to fully benefit from all available features.
As Crestron improves functions, adds new features, and extends the
capabilities of the ASPIRE_IWS82 speakers, additional information may
be made available as manual updates. These updates are solely electronic
and serve as intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron website periodically for manual update availability and
its relevance. Updates are identified as an “Addendum” in the Download
column.
TROUBLE
POSSIBLE CAUSE(S)
CORRECTIVE ACTION
There is either no
sound or the
sound from the
speakers is
intermittent.
There is a cable
connection error.
Verify the cable connections
between the amplifier and speakers.
The amplifier is not
receiving an input signal
or there is an amplifier
malfunction.
Verify that the amplifer is functioning
correctly, that it is receiving an input
signal, and that the correct input
source is selected.
There is a faulty device
in the system.
Verify that all devices in the system
are functioning properly.
Constant noise
such as buzzing,
humming, or
hissing is coming
from the speakers.
There is a system
grounding fault.
Verify the system grounding
connection.
The low frequency
output is poor.
There are incorrect
polarity connections at
the speaker.
Verify speaker connection polarity
(+ on speaker to + on amplifier).
Height
Width
Cutout
Height
Cutout
Width
Minimum
Mounting
Depth
Depth
Rear View With
Measurement Points