Crestron
Adagio™ ATC-AMFM2
Dual AM/FM Tuner Card
Tuner Card Installation
5. Push the ATC-AMFM2 card into the slot until it stops at the rear
connector, and then push again until the ATC-AMFM2 card snaps into
place.
6. Secure the card in place by tightening the two slotted screws with a
screwdriver.
7. Connect
antenna(s).
8. Apply
AES
power.
Regional Configuration
Once the tuner card is installed, users may change tuner configuration for North
American and European signal reception. Hold down the
Source
and
Room
buttons
on the front panel of the AES for 10 seconds to open Installer Tools. Several choices
are available from Installer Tools for configuring the AES:
•
Select Tuner Format
•
Configure Network
•
Set Number of Rooms
The following procedure will configure your tuner for North American or European
signal reception.
1. Using
the
Selection Knob
, choose
Select Tuner Format
and press the
Enter
button.
2. A Select Tuner Format screen appears with choices for North America
and Europe. Using the
Selection Knob
, select your region and press the
Enter
button.
3. Press
Menu
to exit the Installer Tools menu.
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph.
Operations & Installation Guide – DOC. 6461
Dual AM/FM Tuner Card: ATC-AMFM2
•
7
