Configuration via XiO Cloud
The
allows supported devices across an enterprise to
be managed and configured from one central and secure location in the
cloud. Supported Crestron® devices are configured to connect to the
service out of the box.
Use of the service requires a registered XiO Cloud account. To register
for an XiO Cloud account, refer to
www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-
Registration-Room-Licenses
.
NOTE:
The device may be disconnected from the XiO Cloud service by
navigating to the Cloud Services tab in Crestron Toolbox™ software
(Functions > Device Info > Cloud Services). For details, refer to the
Crestron Toolbox help file.
To connect the device to the XiO Cloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or the device. The MAC address and serial number are
required to add the device to the XiO Cloud service.
NOTE:
If the device has multiple MAC addresses, use the MAC
address that is providing the primary connection back to the
network. For most devices, the Ethernet MAC address should be
used. However, if your device is connecting to the network over a
different protocol (such as Wi-Fi® communications), use the
MAC address for that protocol instead.
2. Log in to your XiO Cloud account at
.
3. Claim the device to the XiO Cloud service as described in the
.
Select the device from the cloud interface to view its status and
settings. The device may now also be managed and assigned to a group
or room. For more information, refer to the
NOTE:
For XiO Cloud accounts with room-based licenses, the device
must be added to a licensed room before its status and settings can be
viewed.
Create an Admin Account
The first time the web configuration interface is accessed, a page is
displayed asking the user to create an admin account. A similar message
is displayed when connecting to the control system in Crestron Toolbox
software if an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the
appropriate text fields.
CAUTION:
Do not lose the username and password for the admin
account, as the control system must be reset to factory settings to
regain access.
2. Click OK to create the admin account. The web configuration
interface refreshes to show the standard login page.
3. Reenter the credentials created in step 1 and click Sign In.
NOTE:
The username and password must also be entered when
connecting from Crestron Toolbox or XPanel.
4
AV4
Quick Start
4-Series™ Control System
