Crestron
AV2 & PRO2
2-Series Integrated Dual Bus Control System
Physical Description
An asterisk (*) indicates that the
feature is not standard on the AV2
configuration.
The 2-Series integrated control system is housed in a black enclosure with silk-
screened labels on the front and rear panels. On the front panel there is a single RS-
232 computer port, standard LEDs, two reset buttons, a reverse LCD display* with
menu function and selection buttons, and an extended bank of LED indicators*. The
front panel of the PRO2 and AV2 are shown below.
PRO2 Front Panel
17.025 in (43.244 cm)
WITHOUT OPTIONAL MOUNTING EARS
19.000 in (48.260 cm)
WITH OPTIONAL MOUNTING EARS
3.469 in
(8.811 cm)
AV2 Front Panel
3.469 in
(8.811 cm)
17.025 in (43.244 cm)
WITHOUT OPTIONAL MOUNTING EARS
19.000 in (48.260 cm)
WITH OPTIONAL MOUNTING EARS
An asterisk (*) indicates that the
feature is not standard (though
may be optional) on the AV2
configuration.
A number of slots reside on the rear panel of the 2-Series: three open Y-BUS slots*,
a Z-BUS slot, and a compact flash slot. Furthermore, as shown after this paragraph,
there is a single RS-232 computer port, network connector, six COM ports, eight
IR/serial ports, eight I/O ports, eight relay ports, and a 110-230 VAC male connector
for power located on the rear panel.
PRO2 Rear Panel
AV2 Rear Panel
Rubber feet are supplied and can be attached to the base of the unit for stability and
to prevent slippage when resting on a flat surface. The unit may also be rack
mounted by attaching metal flanges, also known as ears (supplied), to each end.
Operations Guide - DOC. 5957
Integrated Dual Bus Control System: PRO2 & AV2
•
3
Summary of Contents for 2 Series
Page 1: ......
