INFORMATION:
•
The clock automatically changes from set-up mode to time mode if no keys are pressed
for 20 seconds.
•
The alarm sounds for 2 minutes if no key is pressed to stop it.
SNOOZE FUNCTION
To activate the snooze function, please follow the steps below
•
Press the key “
SNOOZE
/
LIGHT
“, while the alarm sounds, to activate the snooze function.
•
If the snooze function is activated
,
alarm symbol is flashing.
•
The alarm repeat after 5 minutes.
•
The snooze function can be stopped by pressing any key.
12/24 HOURS MODE
The time display can be in 12 (AM/PM
）
or 24 hours mode, please follow the manual set-up to
select
°C/°F TEMPERATURE DISPLAY
The temperature display can be in °C or °F
, press “▼
“ to select in normal mode
MAX./ MIN. FOR THE INDOOR/OUTDOOR TEMPERATURE AND HUMIDITY
•
Press
“
▲
“
to display indoor and outdoor max temperature and humidity,
•
Press
“
▲
“
again to display indoor and outdoor min temperature and humidity
•
Hold
“
▲
“
for more than 3 seconds to clear up the max./min.
TEMPERATURE ALERT SET-UP
•
Hold
“
▼
“
to flash ON OF ,press
“
▲
“
or
“
▼”
to select on/ off
.
•
Press
“
MODE
“
, the upper limit of outside temperature is flashing, use
“
▲
“
and
“
▼”
to
set the maximum alert temperature.
•
Press
“
MODE
“
, the lower limit of outside temperature is flashing, use
“
▲
“
and
“
▼”
to
set the minimum alert temperature.
•
If select OF, press
“
MODE
“
until
to quit the alert.
•
When the alert is activated, the alert symbol will be shown.
.
TEMPERATURE ALERT ON/OFF
•
Alert on: Temperature alert symbol shown in display
•
Alert off: Temperature alert symbol goes out.
INFORMATION
•
The set-up process cannot be completed if the maximum temperature selected is lower
than the minimum selected temperature.
•
The minimum temperature selected must at least be 1°C below the maximum selected
temperature.