Crest Audio NEXSYS - VERSION 3.0, Software Manual

Page: 13 / 76

Crest Audio Inc. NexSys v. 3.0
You can program the Event Scheduler to initiate tasks at a given time (computer clock) or
when some other event (such as a switch closure or a fault) takes place. A scheduled event
consists of four parameters:
• the event trigger
• the task or action to take place, i.e. what to do
• the target of the action, i.e. which device or devices to perform the action to
• number of times to repeat action & at what frequency (just once, hourly, daily...)
Load Monitoring
Systems configured with optional Load Monitoring hardware allows NexSys to perform
diagnostic impedance versus frequency testing of the load on each amplifier channel.
Audio Return
In systems where Load Monitoring hardware is installed, NexSys provides a line level
Audio Return port so that program material may be bussed to the remote control position
for audible monitoring.
MIDI Interfaces
MIDI-compliant third party devices (such as EQ’s, delays, etc.) may be controlled from
within NexSys via the optional MIDI Interface unit. NexSys can send (and receive) MIDI
patch changes from its control panel or as part of a snapshot.
Software Manual Page 2.3