5 YEAR WARRANTY
Olbertz Holdings Pty Ltd ACN 010 003 933 trading as The Crest Company of 165 South Pine Road, Brendale, Queensland, 4500, Ph: 1800 812 261,
www.crest.com.au, warrants that if this Crest product purchased by you from The Crest Company or a retail outlet is found by The Crest Company to be
defective in workmanship or materials within 5 years of the date of purchase, The Crest Company will (at its election) either repair that product, replace the
product, supply an equivalent product or pay the costs of repairing or replacing the product or acquiring an equivalent product.
This limited warranty will not extend to or cover any expenses associated with removing, demounting the original product or installing the repaired, replaced
or equivalent product or all or any of its components, you must bear these expenses. It also does not cover damage or loss resulting from intentional or
unintentional misuse of, tampering with, alterations to or incorrect installation of this product or use of this product for purposes other than that for which it
is designed or in a manner inconsistent with the product’s instructions. This limited warranty also does not apply to damage or loss resulting from fair wear
and tear or events beyond The Crest Company control including but not limited to natural disasters.
In order to claim under this warranty, you must contact The Crest Company and return to The Crest Company (via our nominated reply paid address) the
product and its components and proof of purchase (including the date and location of purchase) so that The Crest Company can verify the defect and
your purchase.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given by this warranty are in addition to other rights and
remedies which you may have under a law in relation to the goods or services to which the warranty relates.
1645/5
PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
Proudly brought to you by:
Step 5: Full Motion Adjustment & Maintenance
1. To change the tilt angle of your display, have one person hold the display firmly in place while another person loosens
the tilt adjustment knob. Once loosened, move your display to the desired position, and then re-tighten the knob (see
Figure.8). Do not release the display until the knob is fully tightened.
NOTE: The tilt adjustment knob has a ratcheting feature.
If you need to change the position of the knob without tightening or loosening it, simply pull the knob outward before
turning.
2. Swivel adjustments can be made by moving the display to the desired position. Be careful that fingers or cables do not
get pinched when moving the mount. Level correction adjustments can be made by rotating the display in the needed
direction. If it is too difficult to turn the display or if the display does not stay in position, adjust the tension of the wing nuts
located behind the front part of the mount (see Fig. 9). Adjust both wing nuts evenly.
Step 4: Final Assembly
1. With the help of another person, place the Display Plate with your TV attached into the Wall Plate.
Carefully lift and hook the front part of the mount onto the back part of the mount.
Do not release the display until the
mount is securely connected.
Replace the wing nuts and washers removed in part 1 and tighten.
IMPORTANT!
The wing nuts must remain sufficiently tightened at all times to prevent the display from being accidentally
knocked from the mount.
2. Attached the Plastic Covers (S) by pressing them onto the wall plate (see Figure 7).
3. Cables can be routed through the hooks located on the Wall Plate.
WARNING: Do not loosen too much as the Wall Mount may fall apart.
Check your TV Wall Mount is secure and safe to use at regular intervals (at least every three months).
Figure 7
Figure 8
Figure 9
