Genesis Ultrasonic Generator-IM-1.1
Operating Instructions
Rev 1.1
, February 21, 2013
3-1
3.
Operating Instructions
3.1
Introduction
Before operating, user is required to perform manual check on items as listed
below in sequence:
•
Verify that the plastic cap on the drain nipple of the tank is securely
tight. Or, if the drain outlet is fitted with a valve, be sure that the valve is
closed
•
Fill the tank with the appropriate liquid to a depth sufficient to cover the
parts being cleaned
•
Check generator serial tag for proper power requirement
3.2
Importance Safety Notification
Be sure the receptacle provides proper electrical ground.
Be certain generator location permits air passage through the
cabinet. Rear of generator should be at least 6” from any wall
or other obstruction.
Generators should be kept dry at all times. Do not allow
moisture or chemicals to collect on or near the ultrasonic
generators.
