JP9:
For manual vertical sync selection this jumper should be shorted, leave open
otherwise. The 25-turn potmeter on the back, labeled V-WIDTH can now be
adjusted with a small screwdriver in order to set the desired vertical sync width.
Turning the potmeter clockwise will increase the value.
JP10:
Short this jumper for negative vertical sync at the output, leaving it open sets a
positive vertical sync.
Warranty
Crescendo-Systems designs and builds all products with the highest of care and every
product should operate trouble-free for many years when used under normal operating
conditions. Therefore, every
RTC2200
carries a 1-year no-hassle replacement warranty.
Should a warranty replacement be needed, please contact
first.
RTC2200 users manual v1.0
