Cres Cor Banquet Warming Cabinets CCB-120A Operating And Maintenance Instructions Download Page 3

5925 Heisley Road • Mentor, OH 44060-1833

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

Banquet Cabinets

FL-2247

Rev. 1 (10/08)

Page 3 of 4

OPERATING and MAINTENANCE INSTRUCTIONS

for CCB-96A and CCB-120A Banquet Warming Cabinets

TROUBLE-SHOOTING CHART:

FAILURE

POSSIBLE CAUSE

1. Yellow light at switch does NOT light.

1a. Circuit breaker/fuse to wall outlet blown.

2a. Cord is unplugged from wall outlet.

3a. Switch is “OFF.”

2. Unit does not get hot.

2a. Thermostat set too low or are off. 
2b. Switch is “OFF.”

3. Unit gets too hot or won’t shut off

3a. Defective electrical parts.

3b. UNPLUG UNIT FROM WALL OUTLET

4. Blower does not work or makes noise.

4a. Defective Blower

5. Excess moisture in cabinet.

5a. Foods taken from oven or fryer should be “slacked 

out” for 5 minutes before placing in hot cabinet.

NOTE: 

Optional digital thermometer will fl ash if cabinet temperature is below 140°F or above 250°F. 

Call the Factory if you need different settings.

If cause is none of the above, refer to our list of Authorized Service Centers, FL-1400.

REPLACEMENT PARTS:

CABINET PARTS:

DESCRIPTION

120 VOLT

240 VOLT

DESCRIPTION

PART NO.

Hot Unit

HU18671-184*

HU18671-185

Door Latch Kit

1006-143-K

Terminal Block

0852-091

0852-091

Latch Strike

1006-144-K

Blower Kit

0769-180-K

0769-182-K

Door Gasket, CCB-96A

0861-173

Heater Kit

0811-214-01

0811-215-01

Door Gasket, CCB-120A

0861-172

Thermostat Kit

0848-062-K

0848-062-K

Door Hinge

0519-084

Thermometer Kit

5238-030-K

5238-030-K

Push Handle

1072-089

Power Cord

0810-029-02*

0810-039-03

Wire Grid

1170-095

Switch Kit

0808-118-K

0808-118-K

Door Assembly, CCB-96A

1221-460-K

Door Assembly, CCB-120A 1221-461-K

For Canadian Use:*

Hot Unit (120 Volt)

HU18671-184C

Power Cord Plug

0713-017

Thermometer Kit, °C

5238-024-01

Summary of Contents for Banquet Warming Cabinets CCB-120A

Page 1: ...e the unit is 2 turned on Plug the power cord into the proper wall outlet 3 HOW TO TURN OFF UNIT Push power switch to OFF HOW TO START UNIT Push the power switch to ON Yellow light will 1 turn on Turn the thermostat to 10 220 F 105 C 2 Preheat assuming a cold cabinet of 75 F 25 C 3 a To 150 F 65 C takes 20 minutes b To 200 F 95 C takes 40 minutes c To 220 F 105 C takes 1 hour 4 Put food into the c...

Page 2: ... with cloth 2 Rinse Stubborn spots and stains Mild abrasive made for stainless steel 1 Apply with damp cloth 2 Rub lightly Burnt on foods or grease Chemical oven cleaner 1 Apply generous coating 2 Allow to stand for 10 15 minutes 3 Rinse 4 Repeat application if necessary Hard water spots and scale Vinegar 1 Swab or wipe with cloth 2 Rinse dry Mild detergents include soaps and non abrasive cleaners...

Page 3: ...utes before placing in hot cabinet NOTE Optional digital thermometer will flash if cabinet temperature is below 140 F or above 250 F Call the Factory if you need different settings If cause is none of the above refer to our list of Authorized Service Centers FL 1400 REPLACEMENT PARTS CABINET PARTS DESCRIPTION 120 VOLT 240 VOLT DESCRIPTION PART NO Hot Unit HU18671 184 HU18671 185 Door Latch Kit 100...

Page 4: ...EN 8 2 8 7 SWITCH POWER 3 1 LIGHT PILOT 4 3 13 7 4 12 11 240V 15A TERMINAL BLOCK W G 6 15P BROWN 1 2 7 8 SWITCH POWER 1 BLUE 3 3 13 LIGHT PILOT 12 10 9 13 12 BLOWER SLEEVING HEATER 9 11 10 13 12 HEATER BLOCK TERMINAL G W BROWN 1 2 120V 15A G 5 15P 7 2 BLUE 11 HEATER 10 11 8 9 9 BLOWER 10 HEATER SLEEVING DIAGRAM FOR 240V UNITS DIAGRAM FOR 120V UNITS BLOWER BLOWER ELECTRICAL SPECS HOT UNIT 0671 184 ...

Reviews: