5925 Heisley Road
•
Mentor, OH 44060-1833
877/CRES COR (273-7267)
•
440/350-1100
Fax: 440/350-7267
•
www.crescor.com
Dish Dolly
Assembly
FL-2274
Rev. 2 (2/04)
Page 4 of 4
How to assemble dolly (cont.):
5. Assemble Item “C” with casters to Item “D”:
Note: Casters with brakes must be mounted on the same side.
a. Pull the corner of the base to the edge of your working table.
b. Hold Item “C” post with the casters up.
c. Place the post into the corner lining up the (4) holes.
d. Screw the post to the base using the M4 hex head screws,
lockwashers and hex nuts.
6. Assemble Item “F” to Item “D”(using the four holes in a diamond shape):
a. Find the four threaded holes on Item “F”, divider assy.
(This is the bottom; the Cres-Cor label faces up).
b. Place the side with the holes on top of the base.
c. Screw together with the (4) winged thumb screws provided
from the bottom underneath the base.
7. Slide the two adapters (Items “A” & “B” from step 2) and the two
gray plastic angles Item “G” down into the four center channels in the dolly
(see Figure 3).
Note: The two adapters are adjustable to fit to your plate size. Refer to FL-0585
On “How to” adjust the adapters.
Figure 3
SLIDE ADAPTERS DOWN INTO CHANNELS
