Trendsetter NEWS SA
6
Trendsetter NEWS SA
Cleaning Inside the Output Device
Cleaning the Edge Detection Strip
Cleaning the Plate Roller
1
To open the front panel:
a. In Print Console software, unlock
the front panel.
b. Rotate the two latches
and lift the front panel.
Rotate the drum to expose the two edge
detection strips.
Dampen a cloth with isopropanol and swipe it along
each strip once, in one direction only.
4
2
3
2
3
Locate the blue plate roller.
Dampen a cloth with water, and
slide the cloth over the plate roller.
To close the panels:
a. Pull down the front panel
and turn the locking latches.
b. Pull down the top panel
and then push on the two
corners to lock the internal
latches.
The top panel opens automatically.
Edge detection strips
* Refer to the
Operator Guide
for full details.
WARNING:
Risk of electrical shock if liquids are
alowed to run freely into the output device.*
CAUTION:
Be careful not to bump your head on
the raised panel.*
!
