Figure 7
Please follow steps below:
2-1.Turn off the clamp meter, and remove test lead or the clamped current conductor at input end;
2-2.Make panel face down, and unscrew battery cover, remove the battery cover and take the battery box
out;
2-3.Remove old batteries from the battery box and install new batteries according to polarity indication;
2-4.Please use batteries with the same model. Do not insert improper batteries;
2-5.After installing new batteries, put battery box inside the device, close the battery cover and secure the
screw.
Content in this manual is considered correct. If users find any errors or omissions, please contact
the manufacturer;
Please read the Safety note and Warning carefully, the company shall not be held liable for any
accidents or damages caused by user
’
s wrong/improper operation.
Battery cover
Screw
Batteries
in battery box
