![Creek Audio VOYAGE i20 Instruction Manual Download Page 17](http://html1.mh-extra.com/html/creek-audio/voyage-i20/voyage-i20_instruction-manual_2682608017.webp)
ENGLISH
ENGLISH
16
DAC max performance
PCM 768kHz, 32-bit, DSD 22.4MHz
IR BUS IN
External IR sensor extender
IR BUS OUT
Daisy chain link to another Voyage device
Loudspeaker Outputs
4mm binding posts with rear and side entry, plus spade lug
Speaker output impedance
<0.02 Ohms 20Hz to 20 kHz (Damping factor >400)
Headphone Output socket
6.3mm stereo jack socket
Headphone output impedance
<22 Ohms, suitable for headphone 12 – 600 Ohms
Mains voltage range
230V nominal. Working range - 170V - 265V AC - 50Hz
115V nominal. Working range - 85V - 140V AC - 60Hz
Factory set to either 230V or 115V. Not user adjustable
Mains fuse type and rating
T10AL 250V - 5 x 20mm glass cartridge fuse
10 Amp, Time-lag, or Anti-surge, rated at 250V
Ground connections
Turntable grounding post next to Line 1 / Phono
Ground Lift
A 2-way switch is located under the chassis on the right
Finish colours
Silver or Black front panel. Outer cover is black
Power Consumption
Idle, Max, Standby <20 Watts, 600 Watt, 0.5Watts
Auto Standby
The amp will switch off after 30 minutes with no signal
Auto Standby Menu
Status and options controlled in Menu
Power supply fuse
T10AL 250V = 10 Amp, Time-Lag, rated at 250V, 5 x20mm
Weight
9kgs (20 lbs) net
11.5kgs (25.35 lbs) gross, packed
Size W/H/D
43 x 8 x 35 cm (17 x 3 x 13.8”)
including feet, knobs, and terminals
Caution
Do not use outside or near water
Please heed all safety warnings