Designed and engineered
in the United Kingdom
EVOLUTION
RDS AM/FM TUNER
Instruction Manual
Thank you for purchasing the Creek Evolution tuner. You are now in possession of a State of the Art RDS AM/FM tuner.
The Evolution is the matching tuner for the Evolution Integrated Amplifier and CD Player, although it will also work very well
with any other manufacturers’ amplifiers. The functions and operation of the Evolution tuner are deceptively simple for the
many features that it offers, all of which can be remotely controlled.
SAFETY REQUIREMENTS
Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these safety
instructions.
WATER & MOISTURE
To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. If the unit is exposed to moisture,
immediately disconnect the power cord from the wall. Take the unit to an authorised service centre for inspection. Do not
touch the unit, power cord, or plug with wet hands.
VENTILATION
You must allow 5 cm (2 inches) of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or
similar surface that could block ventilation from the bottom.
HEAT
Keep the unit away from naked flames, radiators, stoves, or any other heat-producing appliances (including amplifiers).
RACK & STANDS
Place the unit on a fixed, level surface strong enough to support its weight, such as the Creek Audio Rack. Do not place
it on a moveable device that could tip over.
CLEANING
Unplug the unit from the mains supply before cleaning. The case should normally require only a wipe with a soft lint-free
cloth.
POWER SOURCES
Only connect the unit to a power supply of the type and voltage described in the operating instructions or specified on the
rear panel of the unit.
POWER CORD PROTECTION
Connect the unit to the power outlet only with the cord supplied. Do not modify the supplied cable in any way. Do not
attempt to defeat grounding and/or polarisation provisions. Do not use extension cords. Do not route the power cord
where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way.
NON-USE PERIODS
If the unit is to be left unused for a long period of time, the power cord should be unplugged from the wall outlet.
Page 1
