Step 2: Once the crutch tips are
removed, measure 2 ½” from the
bottom and put a small mark in the
inside of the frame. This is where the
u-bolts will be positioned.
Step 3: Insert the u-bolts (A13) into
the two small aluminum pieces
(wheel anchors A8) that will be used
to attach the wheels.
Step 4: Attach each of the wheel
anchors so that the pieces are on the
outside portion of the frame and
facing away from the stool bag. Then
finger tighten the bolts. The u-bolt
should be covering the mark you
previously put on the stool frame 2
½” from the bottom.
Step 5: Without the washer, insert
the axle bolt (A12) into the wheel
through the outside of the wheel
(shallow end) with the threaded end
protruding to the inside. (The
shallow end is the outside of the
wheel).
