Copyright © 2013-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
and XLamp
®
are registered trademarks and the Cree logo is a trademark
of Cree, Inc. Other trademarks, product and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
10
XLamp
®
mT FamiLy & mK FamiLy LED SoLDEring & HanDLing
assEMbLy sToragE & HanDLIng
Do not stack PCBs or assemblies containing XLamp MT Family or MK Family LeDs so that anything rests on the LeD lens. Force applied
to the LeD lens may result in the lens being damaged or displaced. PCBs or assemblies containing XLamp MT Family or MK Family LeDs
should be stacked in a way to allow at least 1 cm clearance above the LeD lens.
Do not use bubble wrap directly on top of XLamp MT Family and MK Family LeDs. Force from the bubble wrap can potentially damage
the LeD.
P
CorrECT
X
Wrong
P
CorrECT
