Page 2 of 2
The information in this document in subject to change without notice.
Visit website for patents that cover these products: Patent http://www.cree.com/patents
Visit website for warranties that cover Cree® BetaLED® Technology products:
Warranties http://www.cree.com/lighting/products/warranty
1.
Using the supplied wiring harness, connect the supply wire to
the supply harness wires using the provided wire connectors.
NOTE
: The ground wires that are attached to the Electrical
Connections Compartment Cover and to the inside of the
mounting arm need to be connected to the Supply Ground
wire using the provided wire connector.
2. If luminaire has 0-10V Dimming Option, connect the Violet Dim
(+) and Gray Dim (-) leads.
3. Connect the fixture and supply harnesses. See
Figure 4
.
1.
Using the supplied wiring harness, connect the supply wire to
the supply harness wires using the provided wire connectors.
NOTE
: The ground wires that are attached to the Electrical
Connections Compartment Cover and to the inside of the
mounting arm need to be connected to the Supply Ground
wire using the provided wire connector.
2. Connect the fixture and supply harnesses. See
Figure 5
.
1.
Using the supplied wiring harness, connect the supply wire to
the supply harness wires using the provided wire connectors.
NOTE: The ground wires that are attached to the Electrical
Connections Compartment Cover and to the inside of the
mounting arm need to be connected to the Supply Ground
wire using the provided wire connector.
2. See
Figure 6
.
3. Connect the supply side connector to the fixture wiring
connector.
STANDARD ELECTRICAL CONNECTIONS -
PHASE TO PHASE 208, 240V
LUTRON ELECTRICAL CONNECTIONS –
ECOSYSTEM DIGITAL DIMMING
Figure 4
Figure 5
UTRON ELECTRICAL CONNECTIONS –
3-WIRE DIMMING
Figure 6
