2
INTRODUCTION
If you experience any difficulty with the installation or operation of your new
shower, then please refer to the “What to do if things go wrong” section in this
manual before contacting us.
Thank you for purchasing a quality
Creda SPA100 Electric Shower
manufactured in England.
To enjoy your new shower at its best, please take time to read this manual thoroughly to
familiarise yourself with all instructions, BEFORE beginning installation.
The
Creda SPA100
is an electric shower incorporating our
“Smart Technology”
and a unique dual
control combining on/off, power select and flow/temperature control.
Your shower is designed to stabilise temperature changes caused by water pressure fluctuations.
These can result from toilets being flushed or taps being turned on and off.
When this happens your showering temperature will be held within a controlled band, provided that
the minimum pressure required by the shower is maintained (see “Effect of Other Water Devices”).
1.
Your shower has been designed for convenience, economy and safety of use, provided that it is
installed, used and maintained in good working order and in accordance with our instructions and
recommendations.
2.
All wiring and installation must be supervised by a suitably qualified person.
3.
THIS APPLIANCE MUST BE EARTHED.
4.
The installation must be in accordance with the current edition of BS.7671 (
the “IEE Wiring
Regulations”)
and “Part P” of the
“Building Regulations”
in force at the time of installation.
Installations outside England and Wales must also conform to any local regulations in effect.
This appliance is intended to be permanently connected to the fixed electrical wiring of the mains
supply with its own dedicated supply.
5.
This appliance must
NOT
be fitted where it may be subjected to freezing conditions
6.
DO NOT
switch the appliance on if you suspect it of being frozen.
Wait until you are sure it has thawed out.
7.
DO NOT
fit any sort of tap or control on the appliance outlet. The appliance is designed to have
an open outlet and should only be used with “Creda” recommended fittings.
8.
Take care to avoid restricting the outlet of the pressure relief device. If water is discharged from
the pressure relief device, maintenance will be required before the appliance can be safely used.
9.
Isolate the mains electrical and water supply before removing the front cover of the appliance.
Section
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to install your
SPA100
Shower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to maintain your
SPA100
Shower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to use your
SPA100
Shower (Detailed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What to do if things go wrong (1) Self Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Accessories and Common Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .
What to do if things go wrong (2) Professional Service . . . . . . . . . . . . . . . . . . . . . . .
Creda After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How your
SPA100
Shower Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guarantee and Contact Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to use your
SPA100
Shower (Summary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
2
2
3
6
7
8
8
9
9
10
11
12
CONTENTS
IMPORTANT SAFETY INFORMATION
11
:
Full details of terms and conditions are available on request from:-
APPLIED ENERGY PRODUCTS LIMITED
MORLEY WAY, PETERBOROUGH PE2 9JJ
TEL: +44 (0) 844 372 7761
FAX: +44 (0) 844 372 7762
Website: www.applied-energy.com
GUARANTEE AND CONTACT DETAILS