Model No.
CRT-310-NR01
SPECIFICATION
Date
2013/12/9
Ver.
1.0
Motorized Card Reader
Page
13/16
10、Preventive and Maintenance
The reader should be maintained after the appropriate interval of use:
1
）
When the transportation roller is dirt, please use cleaning card with alcohol
2
）
Dip the cleaning card into alcohol and execute card transportation command to clean the internal area
.
3
）
Periodic maintenance:
For sensor, magnetic head and IC contact, suggest a maintenance every 2,000 times
①
Sensor maintenance: Connect reader first and operate DEMO to query & check sensor status. In the
initial status (No card inside), the all status of sensor are “OFF”, and if there is a sensor status show
as ”ON”, the maintenance of this sensor group is needed.
②
IC contact maintenance: If any dirt is founded on the IC contact, please use cleaning card with alcohol to
clean. Use method: After insert cleaning card, please execute auto test card type function to clean the IC
contact.
③
Roller maintenance: Use card transportation command and cleaning card.
④
Magnetic head maintenance: Use card transportation command and cleaning card
11、Cautions for use
1
）
Cut the power for ICRW before start to repair
2
）
Prohibit to plug out serial port in electrified condition.
3
）
Grease contamination is prohibited
4
）
Suggest DC12V/3A power supply. Prohibit to access to power surpass 15V
5
）
Plug out power first than serial port
