Model No.
CRT-310-NR01
SPECIFICATION
Date
2013/12/9
Ver.
1.0
Motorized Card Reader
Page
10/16
7、Card moving status：
1. The card holding position at front side
2.
Inner
position
3. IC card operation position
8、Operation mode
8.1 Card insertion of activities：
1) ICRW automatically reads the magnetic stripe card after the card enters in，then moves
the card to the inner specific position；
2）ICRW moves the card to the inner specific position after the card entries from rear terminal.
8.2 Read magnetic stripe card：
ICRW automatically reads the magnetic stripe card after the card enters in，save the data
in RAM，waiting to upload the data after receiving the relevant command；
8.3 Read IC card：moving to IC card operation position，and begin to operate after successfully
move（including auto-test card type）.
8.4 Read contactless IC card: the card staying in ICRW at IC card operation position, RF operation
is allowed at this moment.
8.5 Abnormal cards handling：
1）Abnormal cards means that the size and shape are different from ISO standard cards；
2）ICRW automatically removes the card to the front of entrance if it judges the card is
abnormal as the card enters into the machine；
3）Recharging of abnormal card，if ICRW checks the abnormal card existed，there are 2 ways
to handle as following:
① For the long length card，executing reset command，ICRW removes the card to the front；
② For the shorter card，nowhere the card is in machine or at front entrance，executing
reset command“ejecting the card backwards” ，meantime to insert a normal card ,
ICRW will discharge them together backwards.
1
2
3
