CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
22
CROSS series mixed matrix switch User 's Manual
CROSS Series Mixed Matrix Switcher User 's Manual
3.4.4.2
Remote Bind Controlled Device
Settings
Before you can make the remote bind to the
matrix controller, first you should know IP of
public network connected by the matrix controller,.
Only then, can you start setting. Set as follows:
The client PC run TCP / UDP debugging software,
create a TCP Client connection, fill in the IP
address (i.e. the IP of public network connected
by the matrix controller,), port number (i.e. the
port number of matrix controller). After the
successful setting, you can realize remote control
of the matrix.
