6.Warping/curling of the printed object
Check the bed temperature matches the flament
Check the infll%of the Gcode.The higher the infl,the morelikely to warp
Add a brim orraf to the model in slicing software.
7.Layer shifting
Print head moving too fast,slow down the print speed.
Check X/Y belt and the driving wheel and ensure they are properly installed.
Grease the rods and check all nuts and bolts remain tightened.
8.Freezing screen
Inspect f the touch screen has been pressed by the metal frame at the edge
Checkif sceen has cracks,if so,please contact us at
9.Print head move abnormal
Checkif choosing the right machine type in sicing software
Check if any plugins in the slicing software.
10.Print stopped halfway
Check if the Gcode file is corrupted
Delete pluginsinthe GCode fle
Use print flie mode(memory card)instead of print online via data cable
FAQ
Summary of Contents for ELF PRO
Page 29: ...FAQ ...