Creativity ELF PRO, User Manual, Page: 17 / 32

Upon finish, open Cura for the first time, there might be a default robotmodel appears,
customers may click
File --->"Clear platform todelete it.
Load 3D model into Cura
(1)
Clear the platform by clicking“File”--->“Clear platform”
(2) Load 3D files onto the platform by“File”--->“Load model file...”.Files with extension
such as "STL","OBJ","DAE"and"AMF" can be loaded.Model in grey means it is outside
of the printable area and needs to bemoved or scaled to fit in.
Manipulate 3D model in Cura
(1)Zoom in/out: scroll the mouse wheel
(2) Change viewing angle: right click the model, hold on and move themouse
(3) Position change: left click on the model, hold on and drag the modelto move.
(4)Rotate: single left click on the model and several icons will appear atthe bottom left
of the window (Fig. 21).Click the rotate button, 3 circles will surround the model.Rotate
the model by moving the circle lines.
➢
Lay flat: it is very important to ensure the flat portion of the model iswell attached to
the platform. So, please use Lay Flat option everytimeafter rotating the model, as it
will minimize the adhesion issues during printing.(Fig. 10)
➢
Reset: click it to return the model to the original orientation.